Products

SALE

iFlight Tachyon T2306 2650KV FPV Racing Motor

~~SGD$25.00~~ SGD$17.55

iFlight is committed to providing high performance and efficient products to all our customers and is proud to introduce the all new Tachyon Series motors that is designed from the ground up. Durability is a high concern for us since we understand crashing quadcopters at high speed happens and for this reason the Tachyon series motor are made only with the...

iFlight XING X2207 2450KV/ 2750KV FPV NextGen Motor

SGD$21.83

iFlight XING series motors, designed by FPV pilot and specialist Patrick Xing; combining iFlight's high-quality motor production technology with Patrick Xing's technical expertise to produce a top-of-the-line motor. The elliptical body, powerful stator with high temperature resistant windings, N52H magnets, very small air gap and dynamically balanced bell; result in a motor that delivers incredibly smooth power and thrust. These amazing looking XING motors...

iFlight XING X2306 2450/2750KV FPV NextGen Motor

SGD$21.83

iFlight XING series motors, designed by FPV pilot and specialist Patrick Xing; combining iFlight's high-quality motor production technology with Patrick Xing's technical expertise to produce a top-of-the-line motor. The elliptical body, powerful stator with high temperature resistant windings, N52H magnets, very small air gap and dynamically balanced bell; result in a motor that delivers incredibly smooth power and thrust. These amazing looking XING...

SALE

Infinity RS Force V3 1550mAh 4s Square LiPo (120 - 240C)

~~SGD$47.30~~ SGD$22.70

Special price for package orders! Click drop down box for pricing! *Not available for overseas shipment Infinity Force with graphene tech, version 3 of the successful RS Force racing batteries; featuring a higher discharge platform than version 2 as well as lower sag and higher reliability compared to other similar products. Square form factor will fit most frames and reduces the risk of damage...

iPeaka BORG 35A BLHeli 32 bit ESC 4-in-1 DSHOT 1200

SGD$78.00

iPeaka BORG 35A BLHeli 32 is designed with 32 bit 48MHz FO51K86 MCU, complete with 33 pieces of low ESR capacitors for noise control. It ensures fast response, smooth and stable control of the motors while providing a smooth flight experience and absolute control. The optional heatsink effectively pulls heat away from the MOS tubes, protecting the critical parts of your...

SALE

iPeaka Mini 35A BLHeli 32 bit ESC DSHOT 1200 (A set of 4)

~~SGD$91.50~~ SGD$64.05

The BLHeli_32 bit ESC brings the speed advantage of 32 bit and functionality to quadcopter FPV racing. The mini form size allows the mounting on frames with skinny arms. When paired with the iFlight Revo Bee32 F4 Pro flight controller, an even cleaner and weight shaving is achieved. The advantage: 32 bit processors operate faster than 8 bit, at which...

SALE

Jumper R1D16 Receiver

~~SGD$20.30~~ SGD$14.21

The Jumper R1D16 receiver is compatible with all devices capable of using FrSky D16 mode. Specifications: Dimension 20*15*4mm (without antenna) Weight <2g Number of channels 16ch (SBUS) RSSI (Signal Strength Indication) output 0-3.3v Data return S.port Operating Voltage Range 4.0~6V Operating Current Range 80mA@5V Effective distance full distance (>1.5km) Compatibility FrSky D16 Mode Binding method:Press and hold the receiver's...

Jumper T16 Gimbal Stick-ends Upgrade (M3 thread)

Sold Out

Jumper T16 Internal Multi-Protocol Radio Module Upgrade

Sold Out

Kit to convert Jumper transmitters (T16 and T16 Plus) with external radio modules to internal based radio module as in the Jumper T16 Pro transmitter. The conversion leaves the external JR bay free for use with modules such as CRSF Click link here for installation guide

Jumper T16 Pro V2 (Hall Sensor Gimbals)

Sold Out

The Jumper T16 Pro V2 now comes with an external battery charging port utilizing USB Type C and folding handle for increased convenience along with the same amazing features of the Pro V1; such as full colour screen, new hall sensor gimbals, internal multi-protocol radio module and external JR module bay for use with an external TBS Crossfire module. Jumper T16 is...

SALE

Jumper T18 Pro Carbon Faceplate (ALPS RDC90 Gimbals)

~~SGD$265.50~~ SGD$225.00

The Jumper T18 Pro version comes with the super smooth ALPS RDC90 sensor gimbals offering higher precision than Hall sensors. The Jumper T18, operating on OpenTX, brings the best features of the T16 series along with an upgrade of the JP4-in-1 module into JP5-in-1 for more compatibility The Jumper T18 has a JP5-in-1 multi-protocol module with 2.4G JP4-in-1 and 915MHZ / 868MHZ at...

SALE

Leopard GEP-LX4-V4

~~SGD$64.20~~ SGD$38.52

Leopard are natural predators, capable of staggering acceleration and speed. Manufactured with 3k ultra-light carbon fibre and #7075 aviation aluminum parts for a rigid platform, the Leopard's exhibits great flight characteristics and yet tough against crashes. The V4 Leopard while retaining the quality of the original, it features a striking colour scheme in blue camouflage. All key frame parts...

SALE

M5 Low Profile Motor Props Locknut

~~SGD$4.20~~ SGD$2.10

Low profile to reduce the risk of props working loosely; especially when using props with thicker hubs or motors with shorter shaft. Specifications: Size M5 Material Alloy Colour Titanium grey Profile Low Type Self locking Package includes 4 x locknuts

Micro Cameras Adapter with Protection Cage TPU (KATAK STRETCH - SE & TRP V2)

SGD$3.90

Designed specifically for mounting the light weight Runcam Micro series of FPV camera on the Katak Stretch SE and TRP V2 frame. This FPV camera adapter also provides protection against those camera smashing frontal crashes. 3D printed from TPU for increased durability and in attractive colours. Fit both KATAK Stretch SE as well as the TRP V2. Comes in two...

Micro FPV Camera Adapter (KATAK STRETCH - SE & TRP V2)

SGD$2.10

Shed up to 10g by using these adapters to mount a micro FPV camera on your KATAK Stretch SE or the TRP V2 frames. Easy to mount and designed to allow multiple camera height to suit your preference with no additional screws or nuts required. Specifications: Material TPU Colour Orange, Purple, Red Camera angle 80 degrees Weight 1.8g each pair ...

Mini 5.8G FPV VTx Whip Antenna - MMCX

SGD$1.55

Simple lightweight whip antenna, great for short range FPV flying or close proximity flying on mini quads where antenna "catch" is more likely to happen. Also tested indoor and car park flying conditions with good results. Specifications: Frequency 5.8hz range Connector MMX Angle / Straight Length 8.2cm (tip to connector tip) Weight with connector Angle: 1.5g Straight: 1.5g

SALE

Mini 5.8G FPV VTx Whip Antenna - SMA

~~SGD$3.10~~ SGD$2.17

Simple lightweight whip antenna, great for short range FPV flying or close proximity flying on mini quads where antenna "catch" is more likely to happen. Also tested indoor and car park flying conditions with good results. Specifications: Frequency 5.8hz range Connector SMA Male Length 110mm (tip to connector tip) Weight 5.5g with connector

SALE

Mini 5.8G FPV VTx Whip Antenna - uFL IPEX

~~SGD$1.80~~ SGD$1.26

Simple lightweight whip antenna, great for short range FPV flying or close proximity flying on mini quads where antenna "catch" is more likely to happen. Also tested indoor and car park flying conditions with good results. Original replacement part for EWRF e7092TM VTx Specifications: Frequency 5.8hz range Connector uFL IPEX Length 65mm (tip to connector tip) Weight 1g with...

MMCX to SMA Pigtail Replacement for EWRF e709TM3

SGD$1.60

SALE

Motors screw set (20pcs)

~~SGD$4.70~~ SGD$2.82

SALE

Panda Power 1300 4S 95c Top C Series

~~SGD$36.70~~ SGD$22.02

*Not available for overseas shipment Awesome new pack from Bonka! These packs take the beating, even from the more abusive setups like 2206-2600s and 5051x3 props! Specifications : Capacity 1300mAh Type 4S1P / 14.8V / 4 cell lithium polymer Constant discharge 95C Burst discharge 190C Charge Rate 1-3C recommended, 5C max Power Connector XT60 Size 33 x 34 x...

SALE

Replacement Arm for Vertigo VX2 Frame (2 pcs)

~~SGD$14.60~~ SGD$8.76

Replacement Motormount for Vertigo VX2 frame (2pcs)

SGD$3.75

SALE

Replacement Sponge for FatShark Goggles Faceplate

~~SGD$13.20~~ SGD$7.92

Improved comfort with the nylon sponge material and special nose bridge design reduces light leakage for pilots with smaller nose bridge. Specifications: Fit HD and Dominator series Attachment Velcro Material Nylon sponge Package includes 1 x grey foam 1 x black foam 2 x backing velcro

SALE

RGB 10 LED 3535 Multi-Colors Race Wire for 4 in 1 ESCs - 4pcs

Sold Out

iFlight's latest race wire for use with 4in1 ESCs motor connection can now be configured via the FC's firmware configuration, allowing multi-colored LED and scheme. Using race wires with 4in1 ESCs reduces the risk of cutting motor wires from prop strikes. It is also great for mounting underarm for lighting up your quad. Specifications: Current capacity 40amps No. of...

SALE

RPSMA Male to SMA Female Extension/ Adapter cable

~~SGD$4.00~~ SGD$2.00

Rubber Vibration Damping Bobbins for Flight Controllers - M2/ M3

SGD$2.10

With the high cycle timing of current flight controllers and powerful motors employed by FPV quad racers, soft mounted flight controllers are almost always required to prevent twitches or oscillations caused by high-frequency vibrations that interfere with accurate gyro reading and PID tunes. These bobbins uses soft but tough rubber damping material to damp out motors, props train and frame's undesirable...

RunCam Micro Swift 2 - 2.1mm IR Blocked

Sold Out

Specifications: Image Sensor 1/3" SONY Super HAD II CCD Horizontal Resolution 600TVL Lens 2.1mm (M8) FOV160° IR Blocked Signal System PAL / NTSC Integrated OSD Yes One Touch Scene Setting(AGC) Personal / Lightrax / Outdoor / Indoor / Cloudy / Twilight S/N Ratio >60dB (AGC OFF) Electronic Shutter Speed PAL: 1/50~100,000; NTSC: 1/60~100,000 Auto Gain Control (AGC) Yes Min....

SALE

RunCam Micro Swift 3 V2 – 2.1mm IR Blocked

~~SGD$45.80~~ SGD$34.35

Specifications: Image Sensor 1/3" SONY Super HAD II CCD Horizontal Resolution 600TVL Lens 2.1mm (M8) FOV160° Signal System PAL / NTSC Integrated OSD Yes One Touch Scene Setting(AGC) Personal / Lightrax / Outdoor / Indoor / Cloudy / Twilight S/N Ratio >60dB (AGC OFF) Electronic Shutter Speed PAL: 1/50~100,000; NTSC: 1/60~100,000 WAuto Gain Control (AGC) Yes Min. Illumination 0.01Lux@1.2F...

RunCam Racer 2 – 1.8mm/2.1mm IR Blocked

SGD$35.33

RunCam Racer 2, a micro size FPV camera designed specifically for FPV racing with ultra low latency of 6ms and super-WDR. The Racer 2 comes with an additional adapter for mounting in a full size frame Specifications: Model RunCam Racer 2 Image Sensor Super WDR CMOS Sensor Horizontal Resolution 700TVL Lens 1.8mm FOV160° / 2.1mm FOV 145° Screen Format 4:3...

RunCam Racer Nano 2 - 1.8mm IR Blocked

Sold Out

RunCam Racer Nano 2 is a micro size FPV camera designed specifically for FPV racing with ultra low latency of 6ms and super-WDR. The RunCam Racer Nano 2 has 3 pre-set scene mode: Personal, Lightrax and Darkness which can be changed via joystick control or gesture control. Specifications: Model RunCam Racer Nano 2 Image Sensor Super WDR CMOS Sensor Horizontal...

RunCam Swift 2 - 2.1mm IR Blocked

SGD$39.75

Specifications: Image Sensor 1/3" SONY Super HAD II CCD Horizontal Resolution 600TVL Lens 2.1mm IR Blocked Signal System PAL Integrated OSD YES Integrated MIC YES S/N Ratio >60dB(AGC OFF) Electronic Shutter Speed PAL:1/50~100,000; NTSC:1/60~100,000 AutoGain Control(AGC) YES Back light compensation(BLC) YES Min.illumination 0.01Lux/1.2F WDR D-WDR DNR 2DNR Day/Night Color / Auto / B&W Power DC 5 to 36V Working...

SALE

Rush Racing VTx- 5.8G 48CH Pit/25/50/200/500mW

~~SGD$34.30~~ SGD$24.01

RUSH Racing, a quality 5.8GHz VTX designed for racing quads with strong anti-interference ability and stable transmission. LOCK-ON technology prevents frequency drift, allowing up to 8 pilots to fly simultaneously without interference. Four adjustable levels of transmitting power -Pit/25/50/200/500/mW SmartAudio protocol authorized by TBS Full metal casing means efficient heat dissipation as well as great protection from crashes and dings...

SALE

Rush TANK VTx 5.8G 48CH Pit/25/200/500/800mW

~~SGD$44.70~~ SGD$31.29

RUSH Tank, a quality 5.8GHz VTX designed for racing or freestyle quads with strong anti-interference ability and stable transmission. LOCK-ON technology prevents frequency drift, allowing up to 8 pilots to fly simultaneously without interference. Four adjustable levels of transmitting power -Pit/25/200/500/800mW SmartAudio protocol authorized by TBS Full metal casing means efficient heat dissipation as well as great protection from crashes...

SANYO Electrolytic Capacitor Low ESR for Power Supply (pack of 2)

SGD$1.14

Available in 2 voltages - 25V and 35V Recommend for use on quads that experience issues caused by electrical “noise” in the system or FCs with sensitive gyros - lines in the FPV feed when increasing throttle, vibrations/oscillations that cannot be tuned out, motor glitches etc. Specifications: Rated voltage 35V (ideal for 4S LiPo, max 5S) 25V (ideal for 3S LiPo,...

SMA/ RP-SMA Adapter for Antenna

SGD$1.65

SMA/ RP-SMA Adapter- Extension cable

SGD$1.65

SALE

SpeedX GEP-GR1106 7500kv

Sold Out

GEP-GR1106, a high performance motor designed specifically by GEPRC for micro frames spinning 2 to 2.5” props. Ideal KV for 2S Lipos quads giving best balance of power and performance Specifications: Stator size 1106 Configuration 9N12P KV 7500 Shaft Dia 1.5mm Motor Size dia14.2mm x ht 14mm Rotor N50SH arc magnet Bearings NSK Voltage 2 - 3S Max Current...

SALE

Speedy Bee Bluetooth-USB Adapter

~~SGD$26.00~~ SGD$19.50

Speedy Bee Bluetooth-USB Adapter is an unique device that allows you to configure and tune your BetaFlight settings right from your phone via the SpeedyBee app which means no more lugging a laptop to the flying field! Specifications : Model Speedy Bee Bluetooth-USB Adapter Output power 0 dBm Receiver sensitivity -94 dBm Transmission rate Bidirectional 2K/s Bluetooth protocol Bluetooth specificiation V4.0...

Speedy Bee F7 AIO Flight Controller

Sold Out

Speedy Bee F7 AIO is an all new AIO flight controller that integrates PDB, Bluetooth , Barometer, 32MB OnBoard Flash for BlackBox, and users can adjust the parameters of the flight controller using the Speedy Bee App with an integrated Bluetooth chip. The board comes with esc solder pads for use with individual ESCs as well as a connector if building with...

SucceX 2-8S PDB w/ 5V/12V BEC

Sold Out

The Succex Power distribution board is designed for high voltage and high current applications. It consists of 2+2+3+3 layers of heavy copper to sustain maximum current demand. This PDB can sustain up to a maximum total 330A. Also features 12V 3Amp and 5V 3Amp regulators with a maximum of 8S (36V) input. In addition, it can also collect the signal...

SucceX 50A 2-6S 4-in-1 ESC

Sold Out

A high quality 30 x 30 full size BLHeli 32 ESC board with a good value to price performance, this ESC can handle input voltage of up to 6S and incorporate quality TDK MLCC low ESR capacitors and NTMFS5C430NL MOSFETs for good flight performance and response. Features: - 8 layers double-sided PCB board; - 4oz 1.6mm thick power board(0.9mm copper ratio),better...

SucceX 55A Slick 2-6S ESC (set of 4)

Sold Out

SucceX 55A Slick 2-6S ESC is specially designed for FPV racing frames with slim arms. The STM32F051 is combined with a high-performance 3 in1 driver for improved latency. Specifications : MCU STM32F051 Frequency Up to 48kHz PWM frequency Protocol Dshot1200, Proshot, Oneshot, Multishot Capacitance 470μF/50V Input 2-6S LiPo Current sensor Yes Capacity 35A, 45A burst Dimension 35*11mm Weight 3.7g without wires...

SucceX 60A V2 Plus BLHeli_32 4 in 1 ESC

Sold Out

iFlight SucceX 60A V2 Plus BLHeli_32 4 in 1 ESC is designed to give motors smooth power with great stability and durability. The 32bit 48mHz 3-IN 1 STM32F051 MCU, Metal MOSFET, TDK MLCC Low ESR ceramic capacitors provide high efficiency and better heat dissipation. A perfect companion to the SucceX TwinG F7 flight controller Specifications : MCU STM32F051 Protocol Dshot150/300/600/1200, Oneshot, Multishot...

SucceX F7 TwinG Flight Controller V2.1

Sold Out

SucceX F7 TwinG // GYRO FUSION is the NEXT-GEN flight controller, ready for anything, with 5 uarts, 8 motor outputs, 32Mb blackbox and a powerful F7 processor to run it all. With it's clean intuitive layout, the SucceX F7 TwinG makes installation a breeze with a 4-pin connector for your VTx and an 8-pin connector that allows simple plug and...

SALE

SucceX Force Nano 5.8g 300mW VTX Adjustable Power

~~SGD$39.00~~ SGD$27.30

Small in size but big in power! The iFlight Micro Force is the VTX you need for your next micro build. Excellent power output stability with switchable power from 25mW to 300mW and with a PIT mode. Original replacement part for iFlight Alpha Whoop A85 (NOTE: for replacement, reuse the VTX adapter board on the A85) Specifications : Power transmission PIT / 25...

SALE

SucceX Micro 200MW VTX

~~SGD$20.50~~ SGD$14.35

Replacement part for Succex Micro F4 V2.1 Flight Stack Specifications : Power PIT/25/100/200mW VTx control protocol IRC Tramp Antenna interface IPEX (UFL) Mounting holes 16 x 16mm Weight 1.6g Package include : 1 x 5.8G SucceX Micro 200mW VTX V2

SALE

SucceX Micro ESC 15A V2.1 with Plugs

~~SGD$49.50~~ SGD$34.65

Replacement part for Succex Micro F4 V2.1 Flight Stack Specifications : MCU BB21F16G BEC No Firmware G-H-30 BLS 16.7 BLHeliSuite http://www.mediafire.com/file/1tn449x6815upat/BLHeliSuite16714901.zip/file Input voltage 2-4S LIPO Continuous current 15A Current sensor Yes ESC protocol Pwm, oneshot125, multishot, dshot150, 300, 600, etc. Protocol support Smartaudio & Tramp VTX Mounting hole 16 x 16mm Weight 3.6g Package include : 1pc x SucceX...

Products

Recently Viewed